Porcelain Tiles’ Physical Qualities
Many people frequently mistakenly believe that all porcelain tile products are equivalent and are simply referred to as “porcelain tile.” The situation is different, though. Knowing the distinctions between the many varieties of porcelain tile will help buyers choose the material that will best suit the demands of the project for which porcelain flooring tile is needed. The porcelain tiles have the following distinctive physical qualities.
Chemical Attack Resistance of Porcelain Tiles
A significant variance was discovered related to the surface treatments when the resistance of porcelain tiles against ferrous oxide red stain was tested. Therefore, the stain resistance of the tiles may be increased by surface cleaning and treatments including coating, sealing, and glazing.
Resistance to Abrasion
Porcelain is good at absorbing the wear and tear caused by various levels of traffic, which is a crucial quality of any flooring tile. A characteristic used to determine a tile’s hardness is its abrasion resistance. The number of rotations made per minute by a tool or machine that rubs the tile surface after glazing is shown in the table above. On the packaging and their websites, several porcelain tile companies provide the grades.
Frost Resistance
The rate of water absorption here provides an indirect indication of the porosity and permeability of the porcelain tiles. Some tiles are immersed in boiling water, while others are weighed before and after the water treatment process to gauge the amount. Porcelain tiles have an incredibly solid quality that makes them impermeable and essentially non-porous. Low-density or highly porous tiles are non-vitreous and hold the most water during testing. As a result, vitreous tiles are preferable for outdoor applications, whereas semi-vitreous porcelain tiles are ideal for indoor flooring.
Flexure Strength of Porcelain Tiles
The porcelain tiles’ breaking load, breaking strength, and modulus of rupture are high and comparable to many different kinds of natural stones. Porcelain tiles typically have a flexural strength of 40.0 MPa and a fracture strength of 1.10 MPa.
If you wanted to have the best results for porcelain flooring for your property in Irvine, CA, make sure to consult the specialists from Lido Tile Co. Contact us at (949) 203-1974 today!